Three Jaw Chuck [80mm] – Hexagonal Jaw Chuck “Three Jaw Chuck Works Like Fractal Vise “

Triple jaw chuck with double jaw technology which makes it have six jaws, making it more compact and has a strong grip. can hold objects through six-point fixing for a firmer grip, can hold any shape you want, and can hold cylindrical and non-cylindrical shapes.

•RGS-63 is a chuck-style rotary that holds engraving objects using a set of jaws. The grip can be considered a different attachment to the rotary system

•The chuck is installed through the GT-2 mounted on the back of the chuck. You can choose between 5mm and 8mm diameter for mounting.

•The three self-centering jaws are reversible to allow the holding of larger workpieces. jaws installed in order 1, 2, and 3 to match the numbers on the housing. To fit them reversed, insert them in the order 3,2,1. Fit the slider plate into the housing and place the Circlips over the shaft to secure it. Turn the slider over so that the front end of the slider is about to pop into one of the slots. Feed into Jaw 1, large end first, and rotate the slider plate to snap it. Repeat with Jaw 2 in the next hole, then Jaw 3 in the next hole.

•For high envelope stability, the printed 36x1.75mm Plain External Circlips(Retaining ring) can be replaced with a metal steamer.

•Make sure the External Circlips are in place for better stability when opening and closing the jaws.

•To get a strong grip, you must add a piece of rubber to the jaws. To get a tight grip, I used welding tape.

•It can be printed with any filament "Preferably printing with Petg filament".