Three Jaw Chuck-63mm,Chuck SANOU-K01-63, rotary axis, laser machine,2.5inch diameter three-jaw chuck

•Three-jaw chuck 2.5" in diameter Self-centering jaws All parts are fully printable I wanted to get the original for my laser machine but they are expensive so I made this for me It is used to hold small rotating parts while laser engraving or fixing parts Small on Unimat 3 match and also the many recent "8-in-1 Mini Lathe" kits available from China.

•The three self-centering jaws are reversible to allow the holding of larger workpieces. jaws installed in order 1, 2, and 3 to match the numbers on the housing. To fit them reversed, insert them in the order 3,2,1. Fit the slider plate into the housing and place the Circlips over the shaft to secure it. Turn the slider over so that the front end of the slider is about to pop into one of the slots. Feed into Jaw 1, large end first, and rotate the slider plate to snap it. Repeat with Jaw 2 in the next hole, then Jaw 3 in the next hole.

•For high envelope stability, the printed 36x1.75mm Plain External Circlips can be replaced with a metal steamer.

•It can be printed with any filament[PLA+,ABS+]

•For a strong chuck, you should use PETG filament and watch this video
https://www.youtube.com/watch?v=DyAKtS1b3SQ

•To find out how to put the parts together, watch this
https://www.youtube.com/watch?v=j5zgfhu_qMU
•Enjoy, you are the best
https://www.youtube.com/shorts/JGC2TSnYTOM